
Hydronic Radiant Installation
Tubing, manifolds, circulators and controls installed and commissioned as one system with the heat source.
Even, quiet warmth from the floor up. NJM installs and services radiant floor heating for Long Island homes, with the plumbing and heating handled by the same licensed team across Nassau and Suffolk County.
22+ YEARS ON LONG ISLANDLICENSED & INSURED · NASSAU & SUFFOLK
PLUMBING · HEATING · COOLING · CONTRACTING
Have An Emergency? We’re Available 24/7.
631-587-0085WE ANSWER EVERY CALLRadiant floor heating warms the floor, and the floor warms the room. There is no blower, no vents, no draught and nothing to hear. It also heats from the bottom up, which is the opposite of how a radiator works and the reason a room at the same thermostat setting feels warmer — your feet are on the warm surface rather than the cold one.
The catch is that it is easiest to install when the floor is already open. That makes renovations, additions and new builds the natural moment, and retrofitting under an existing finished floor considerably more involved. NJM installs and services radiant heating across Nassau and Suffolk County, and because the plumbing and the heating are the same licensed team, a hydronic radiant system is designed as one job rather than coordinated between two trades.
Master PlumberLicensed to pull permits
TASK 86/87Certified for gas work
Navien NSSFactory-trained on tankless22+ years on Long Island · Plumbing, heating, cooling, gas and contracting under one roof

Tubing, manifolds, circulators and controls installed and commissioned as one system with the heat source.

Under-floor heating mats and cable, typically for bathrooms, installed under tile or stone.

The natural moment for radiant. If the floor is coming up anyway, this is when it costs least.

Room-by-room control, which is one of radiant’s real advantages over a single-zone system.

Designing the heat source and the radiant system together so the boiler runs at the low temperatures radiant wants.

Diagnosing and repairing existing radiant systems, including manifolds, circulators and controls.
Whether radiant can go into an existing finished space depends on the construction and floor build-up. We will look and tell you what is realistic.
Radiant is the best match for a ground-source heat pump. We install both, so it can be one design.
We don’t charge to quote a job. We do charge to find a problem nobody has identified yet. Which one you need — and what it costs — gets agreed on the phone, so nothing about the cost is a surprise on the doorstep.
You get the number on the phone, before anyone is dispatched, and it is what you are charged when the technician arrives. One rate across all four trades — plumbing, heating, cooling and gas.
A licensed, insured technician carrying the certifications the work needs, and the time to find what has actually failed — not a quick look and a guess.
A call-out advertised at almost nothing gets recovered once someone is standing in your basement. Get the number before anyone travels — from us, or from anyone else you call — and hold them to it when they arrive.
A boiler that fails in January is not a purchase anyone planned. Financing is available on the big-ticket work, so a system replacement does not have to come out of savings in one go.
Boiler, furnace and water heater replacement, a full air conditioning system, a whole-house repipe, sewer and water main work, and larger contracting jobs — kitchens, bathrooms, dormers and extensions.
At the estimate, before anything is scheduled. It is worth asking even if you think you will not need it, because knowing it is there changes what you are willing to consider fixing properly.
The price of the job. The quote is the quote whether you finance it or not — and on a straightforward repair it is usually not worth the paperwork. We will tell you which one you are looking at.
Hydronic radiant circulates warm water through tubing in or under the floor, driven by a boiler or heat pump. It is the option for heating whole rooms or whole houses — cheaper to run, and it pairs particularly well with condensing boilers and geothermal because it works at low water temperatures, which is exactly where those are most efficient.
Electric radiant is a heating mat or cable under the floor finish. It is far simpler and cheaper to install, which makes it the usual answer for a single bathroom where the goal is a warm tile floor rather than heating the space. It costs more per unit of heat to run, so it rarely makes sense as a whole-house system. Which one suits you is mostly about scale, and we install both.
One licensed team, one number to call, across Nassau and Suffolk County.
What it says on the coupon is what comes off the bill. Mention it when you call.
Replacing a system before the cold sets in, sized from a load calculation rather than from whatever was there before.
Code NJM-HEAT200Expires October 31, 2026See the details →$50 OffNo heat, not enough heat, or heat in only half the house.
Code NJM-HEATREP50Expires October 31, 2026See the details →Maintenance PlansBoilers and furnaces mostly fail in January, and mostly after a year nobody looked at them. Preset or custom plans, for homes and for commercial buildings.
Code NJM-HEATPLANNo expiryAsk us →Sometimes, and the honest answer depends on the construction. During a renovation when floors are coming up anyway, it is straightforward. Under an existing finished floor it is far more involved — it may mean working from below where there is access, or raising the floor level. We will look and tell you what is realistic rather than quoting for something that will not work well.
Hydronic circulates warm water through tubing, driven by a boiler or heat pump — that is the option for heating whole rooms or whole houses, and it is cheaper to run. Electric is a mat or cable under the floor finish, much simpler to install, and generally used for a single bathroom where the aim is a warm floor rather than heating the space. Electric costs more per unit of heat, so it rarely suits a whole house.
It works best under materials that conduct heat well — tile and stone are ideal. Engineered wood and vinyl are generally fine within the manufacturer’s temperature limits. Thick carpet with heavy underlay is the problem case, because it insulates the floor from the room, which is the opposite of what you want.
It can be, mainly because it runs at lower water temperatures. That matters most with a condensing boiler or a heat pump, both of which are more efficient the cooler the return water. It also heats more evenly, so a room can feel comfortable at a slightly lower thermostat setting.
Longer than a radiator, because it heats the floor mass first. That is why radiant is usually run more steadily rather than switched on and off sharply. The upside is that it holds temperature well once warm, and the heat is far more even.
Yes, and that is the most common radiant job there is. For a single bathroom floor, electric under-tile heating is usually the sensible answer — much simpler and cheaper to install than extending a hydronic system for one room.
Extremely well. Radiant runs at low water temperatures, which is exactly where a ground-source heat pump is most efficient. Since we install both, they can be designed together as one system rather than made to cooperate afterwards.
Yes, free and with no obligation. For radiant we will want to see the space, because the construction determines what is possible. Call 631-587-0085, or use the form and we will be in touch within 24 hours.
Based in North Babylon, working across both counties — close enough to get there fast, local enough to know the housing stock and the permit offices.
Proudly serving all of Nassau and Suffolk County, with deep local roots near our North Babylon home base.
Get A Free Estimate5 out of 5 stars
I am so grateful that I found Neil and that he proved to be a rare and special person that has an amazing work ethic, takes pride in his work, has the qualifications to do the job correctly, and has a heart to truly want to help people. I can't tell you how much that meant to me at a time I was very stressed out. He has restored my faith. I only wish I had met him sooner! He replaced the entire Navien heating System and reworked the radiant floor wiring system. I feel confident and look forward to Neil servicing my beautiful new system for years to come. Thanks so much Neil!!! A truly beautiful job!!!

5 out of 5 stars
NJM Mechanical Inc are awesome!!!!! Just Had a maintenance call / yearly service. Always professional prompt service. I had Neil as my service tech - great job.

5 out of 5 stars
Couldn't be happier with NJM Mechanical and Neil. I needed a new Navien wall mounted gas combination boiler. He showed up on Friday afternoon to diagnose and was at my house at 7am the very next morning on a Saturday throwing in my new Boiler. They didn't charge Emergency Service rates and they beat their competitors price by over $500!


Free estimates with no obligation, 24/7 emergency response, and 22+ years serving homes and businesses across Nassau and Suffolk County.